CD150M
The Godwin Dri-Prime 6" (150mm) CD150M automatic priming centrifugal pump is clearly the backbone of the temporary portable pumping industry. With solids-handling to 3" (75mm) in diameter, maximum flows of 1700 GPM (385.9 m3/h) and 160' (48.8 m) of total dynamic head, and indefinite dry-running capabilities, the CD150M can be found in a wide variety of applications from dewatering to sewage bypassing. Mounted on a highway trailer, the CD150M is the most maneuverable and versatile portable pumping system available, making it a favorite of contractors, municipalities, industry and environmental companies across the country.
- Fully automatic priming from dry to 28' (8.5 m) of suction lift.
- Close coupled centrifugal pump with vacuum priming compressor mounted to a diesel engine. Also available in electric drive.
- Extensive application flexibility — will handle raw sewage, slurries and liquids with solids up to 3" (75 mm) in diameter.
- Dry running, oil bath mechanical seal with abrasion-resistant solid silicon carbide faces.
- Continuously operated Godwin venturi air ejector priming device featuring belt-driven air compressor requiring no form of periodic adjustment or control.
- All cast iron construction with cast chromium steel impeller.
- Standard John Deere 4045D-T2, John Deere 4045T-T3, or Caterpillar 3054C-NA engine. Also available with a variety of other engines including Hatz, Perkins and Deutz.
Performance Table
Diesel Set —
JD4045D-T2, 68 HP (51 kW) @ 2200 RPM
JD4045T-T3, 71 HP (53 kW) @ 2200 RPM
CAT3054C-NA, 74 HP (55 kW) @ 2200 RPM
Impeller Diameter — 11" (279 mm)
| Total Delivery Head - Feet |
| Total Suction |
10 | 20 | 30 | 40 | 50 |
| Head - Feet | Output - GPM | ||||
| 10 | 1800 |
1780 |
1750 |
1700 |
1680 |
| 15 | 1700 |
1650 |
1600 |
1520 |
1400 |
| 20 | 1670 |
1590 |
1500 |
1380 |
1240 |
| 25 | 1500 |
1400 |
1340 |
1240 |
1100 |
Performance data listed in table and curves based on water tests at sea level and 68°F (20°C).
Maximum flows may require larger diameter pipes.
Specifications
| Pipe Connections | 6" (150 mm) ASA 150# |
| Max. Capacity | 1700 GPM (385.9 m3/h) |
| Max. Head | 160' (48.8 m) |
| Solids Handling | 3" (75 mm) |
| Impeller Diameter | 11" (379 mm) |
| Max. Op. Temp. | + 212 F (100 C) |
| Max. Working Press. | 58.5 psi (4 BAR) |
| Max. Suct. Press | 40 psi (2.8 BAR) |
| Max. Test Press. | 88 psi (6.1 BAR) |
| Max. Op. Speed | 2200 RPM |
| Fuel Tank Capacity | 30* - 100 gal. (113.5 - 378.5 l) |
* 60 gal. (227 l) standard equipment
Pump Casing, Suction Cover, Separation Tank, Wearplates, Non-Return Valve Body, Ejector Housing
Close-grained cast iron
Impeller
Cast chromium steel, hardened to minimum Brinell 341 HB
Non-Return Valve - Ball & Seat
High nitrile rubber
Mechanical Seal Faces
Solid silicon carbide
Pump Shaft
1½ Nickel/chromium steel
CD150M - John Deere 4045D, GP60 Highway Trailer
Dry weight - 3250 lbs. (1474 kg)
