CD103M
The Godwin Dri-Prime 4" (100mm) CD103M automatic priming centrifugal pump is a highly maneuverable portable trash pump with flow capabilities to 1,000 gallons per minute (833 Imperial GPM), total dynamic heads to 170 feet (52 meters) and solids handling to 3" (75mm) in diameter. The unique Godwin venturi air evacuation system allows the CD103M to prime from dry conditions with suction lifts up to 28 feet (8.5 meters). Perfect in intermittent flow situations, the CD103M can run dry indefinitely without damage due to the oil bath mechanical seal design. For sewage handling, dewatering, municipal usage, and many other applications, the Godwin CD103M with 4" (100mm) hoses is a powerful, yet versatile and portable pumping system.
- Close coupled centrifugal pump with vacuum priming compressor mounted to a diesel engine. Also available in electric drive or as bare shaft pumpend.
- All cast iron construction with cast chromium steel impeller.
- Extensive application flexibility — will handle raw sewage, slurries and liquids with solids up to 3 inch (75mm) in diameter.
- Continuously operated “Godwin” air ejector priming device requiring no form of periodic adjustment or control.
- Dry running, high pressure oil bath mechanical seal with abrasion resistant solid Silicon Carbide interfaces.
- Compact unit mounted on skid base or two wheeled highway trailer both incorporating integral overnight running fuel tank.
- Simple maintenance — normally limited to checking engine and seal cavity oil levels.
- Standard engine — John Deere 4024T. Available with a variety of engines including Caterpillar, Hatz, Perkins and Deutz.
- A variety of silenced sets are available.
Performance Table
Diesel Set — John Deere 4024T, 41 hp @ 2200 rpm
Impeller Diameter — 10-7/16 in. (256 mm)
| Total Delivery Head - Feet |
| Total Suction |
60 | 80 | 100 | 120 | 140 |
| Head - Feet | Output - GPM | ||||
| 10 | 1030 |
1015 |
920 |
740 |
440 |
| 15 | 1010 |
960 |
880 |
680 |
360 |
| 20 | 890 |
860 |
785 |
600 |
270 |
| 25 | 800 |
760 |
720 |
520 |
180 |
Performance data listed in table and curves are based on water tests at sea level and 68° F (20° C).
Larger diameter pipes may be required for maximum flows.
Specifications
Maximum Operating Speed:
2200 rp
Maximum Operating Temperature:
+176° F (80° C)
Maximum Working Pressure:
64 psi (4.4 BAR)
Maximum Suction Pressure:
73 psi (5.0 BAR)
Maximum Casing Pressure:
97 psi (6.7 BAR)
Fuel Tank Capacity:
60 gallons (227 liters)
Pipe Connections:
4" (100mm) ASA 150#
Solids Handling:
3" (75mm) dia. standard impeller
Pump Casing, Suction Cover, Separation Tank and Wearplates:
Close grained cast iron
Impeller:
Cast chromium steel – Minimum Brinell 220 HB
Shaft Sleeve and Shaft:
1-1/2% nickel/chromium steel
Non Return Valve Body:
Close grained cast iron
Non Return Valve Ball and Seat:
High nitrile rubber
Mechanical Seal Faces:
Solid Silicon Carbide
CD103M — John Deere 4024T, GP60 Highway Trailer Weight: 2,400 lbs. (1,086 kg.)
Product Datasheets
