CD180M
The 8" (200mm) by 6" (150mm) CD180M portable diesel pump offers both elevated heads and solids handling capabilities without sacrificing flow rate. The pump achieves total dynamic heads to 260 feet (80 m), solids handling to 3" (75mm) in diameter, and flows to 2000 GPM (450 m3/h).
The CD180M is an automatic self-priming Dri-Prime pump with the ability to prime and re-prime from dry. Featuring an oil bath mechanical seal, this pump runs dry without damage, ideal for intermittent flow conditions associated with bypass pumping and backup municipal lift station applications. The CD180M complements Godwin’s elevated head series of high volume solids handling pumps.
- Fully automatic priming from dry to 28' (8.5 m) of suction lift.
- Close-coupled centrifugal pump with vacuum priming compressor mounted to a diesel engine. Also available in electric drive.
- Extensive application flexibility – will handle raw sewage, slurries and liquids with solids up to 3" (75 mm) in diameter.
- Dry-running, high pressure oil bath, mechanical seal with high abrasion-resistant silicon carbide interfaces.
- Continuously operated Godwin venturi air ejector priming device featuring belt driven air compressor requiring no form of periodic adjustment or control.
- All cast iron construction (stainless steel construction optional) with cast chromium steel impeller.
- Standard engine – John Deere 6068H. Available with a variety of engines including Caterpillar, Cummins and Deutz.
- Available in skid or trailer mount with overnight running integral 150 gal. (568 l) fuel tank and single point lifting bale.
Performance Table
Diesel Set — JD6068H, 147 HP (110 kW) @ 2000 RPM
Impeller Diameter — 14" (356 mm)
| Total Delivery Head - Feet |
| Total Suction |
150 | 175 | 200 | 220 | |
| Head - Feet | Output - GPM | ||||
| 10 | 2000 |
1800 |
1500 |
1050 |
| 15 | 1850 |
1760 |
1380 |
900 |
| 20 | 1580 |
1450 |
1250 |
710 |
| 25 | 1380 |
1300 |
1190 |
580 |
Performance data listed in table and curves based on water tests at sea level and 68°F (20°C).
Maximum flows may require larger diameter pipes.
Specifications
| Pipe Connections | 8" (200 mm) Suction 6" (150 mm) Discharge |
| Max. Capacity | 2000 GPM (450 m3/h) |
| Max. Head | 260' (80 m) |
| Solids Handling | 3" (75 mm) |
| Impeller Diameter | 14" (356 mm) |
| Max. Op. Temp. | +212 F (100 C) |
| Max. Working Press. | 130 psi (9 BAR) |
| Max. Suct. Press | 72 psi (5 BAR) |
| Max. Casing Press. | 195 psi (13.5 BAR) |
| Max. Op. Speed | 2000 RPM |
| Fuel Tank Capacity | 150 gal. (568 l) |
Pump Casing & Suction Cover
Cast iron
Wearplates
Cast iron hardened to minimum Brinell 341 HB
Pump Shaft
1½% Nickel/chromium steel
Impeller
Cast chromium steel hardened to Brinell 341 HB
Non-Return Valve Flapper
High nitrile rubber
Mechanical Seal Faces
Solid silicon carbide
Skid-mounted JD6068H engine
Weight - 6685 lbs. (3032 kg)
Product Datasheets
