Advanced Product Search
Product Lines
Models

(or press ESC or click the overlay)

CD225M
CD225M

CD225M

The Godwin Dri-Prime CD225M pump offers flow rates to 3240 USGPM and has the capability of handling solids up to 3.0" in diameter. 


The CD225M is able to automatically prime to 28' of suction lift from dry. Automatic or manual starting/stopping available through integral mounted control panel or optional wireless-remote access.


Indefinite dry-running is no problem due to the unique Godwin liquid bath mechanical seal design. Solids handling, dry-running, and portability make the CD225M the perfect choice for dewatering and bypass applications.

 

 

  • Simple maintenance normally limited to checking fluid levels and filters.
  • Dri-Prime (continuously operated Venturi air ejector priming device) requiring no periodic adjustment. Optional compressor clutch available.
  • Extensive application flexibility handling sewage, slurries, and liquids with solids up to 3.0" in diameter.
  • Dry-running high pressure liquid bath mechanical seal with high abrasion resistant solid silicon carbide faces.
  • Close-coupled centrifugal pump with Dri-Prime system coupled to a diesel engine or electric motor.
  • All cast iron construction (stainless steel construction option available) with cast steel impeller.
  • Also available in a critically silenced unit which reduces noise levels to less than 70 dBA at 30'.
  • Standard engine John Deere 4045TF285 (T3 Flex). Also available with John Deere 4045HFC92 (IT4).

Suction connection: 8" 150# ANSI B16.5

Delivery connection: 8" 150# ANSI B16.5

Max capacity: 3240 USGPM †

Max solids handling: 3.0"

Max impeller diameter: 11.4"

Max operating temp: 176°F*

Max pressure: 73 psi

Max suction pressure: 73 psi

Max casing pressure: 110 psi

Max operating speed: 2200 rpm

* Please contact our office for applications in excess of 176°F.

† Larger diameter pipes may be required for maximum flows.

Pump casing & suction cover:
Cast iron BS EN 1561-1997

Wearplates:
High Chromium Cast Iron HC403:1997

Pump Shafts:
Carbon steel BS 970-1991 817M40T

Impeller:
Cast Steel BS3100 A5 Hardness to 200 HB Brinell

Non Return Valve Body:
Cast iron BS EN 1561-1997

Mechanical Seal Faces:
Silicon carbide face; Viton elastomer; Stainless steel body

CD225M
CD225M

Product Datasheets

Twitter RSS YouTube
World Headquarters: 84 Floodgate Road | Bridgeport, NJ 08014
Phone: 856.467.3636 | .(JavaScript must be enabled to view this email address) | Terms & Conditions | Privacy Policy
xylem - Let's Solve Water