Advanced Product Search
Product Lines
Models

(or press ESC or click the overlay)

Heidra 200
Heidra 200

Heidra 200

The Heidra 200 hydraulic submersible pump is a self-contained, diesel powered 8" (200mm) pump available for heavy duty municipal and industrial dewatering and solids handling pumping applications. The Heidra 200 offers flow rates up to 3100 gpm (703.7 M3/hr.) with up to 180' (54.9M) of total dynamic head and solids handling capability of 3-1/8" (79mm) in diameter. The unit consists of a sturdy cast iron submersible pumpend and hydraulic power pack mounted on a rugged steel skid. A variable displacement hydraulic piston pump on the power pack delivers hydraulic fluid to a fixed displacement piston motor that drives the pumpend’s shaft, bearings, and cast steel impeller. Simple engine throttle adjustments allow changes to pump flow and head performance.

  • Rugged construction of cast iron pumpend with cast chromium steel impeller.
  • Flow rates to 3100 gpm (703.7 M3/hr.) and heads to 180 feet (54.9M).
  • Unique double mechanical seal immersed in isolated oil bath for unlimited dry running capability.
  • Integral 175 gallon (662 liter) fuel tank capacity provides over 24 hours of continuous operation.
  • Safety shutdown system incorporated into engine controls prevents equipment damage from engine fault or failure.
  • Impeller designed for general pumping with solids up to 3-1/8" (79mm) in diameter.
  • “Quick-Disconnect” hydraulic fittings simplify setup, installation, and shutdown.
  • Standard John Deere 6068T or Caterpillar 3116TA engine. Also available with other diesel engines or electric drive motor.

Submersible Pump:
Hydraulic Motor: Fixed Piston
Drive Pressure: Up to 4000 psi (276 BAR)
Hydraulic Flow: Up to 57 gpm (3.6 l/sec.)
Hydraulic Line Length: 100 feet / 30.5M (longer runs with larger hose)
Solids Handling: Up to 3-1/8" (79mm) diameter
Pump Speed: Up to 2200 rpm
Impeller Diameter: 11-3/8" (290mm)
Discharge Flange: 8" (200mm) ASA 150
Hydraulic Connections: 1-1/4" (32mm) Quick Disconnect
Strainer: Nylon coated with 2-3/4" (70mm) apertures

Power Pack:
John Deere 6068T Engine
     Horsepower: 147 hp (110 kw) @ 2200 rpm
Caterpillar 3116TA Engine
     Horsepower: 143 hp (107 kw) @ 2200 rpm
Fuel Tank Capacity: 175 gallons (662 liters)
Output
     Hydraulic Flow: 57 gpm (3.7 l/sec.)
     Pressure: 4000 psi (276 BAR)
     Control: From engine speed and pressure compensated
Hydraulic System: Two pipe, open circuit
Reservoir: 80 gallon (303 liters)
Control Valve: Pressure compensated on/off valve
Connections:
     1-1/4" (32mm) Quick Disconnect feed and return
     1/2" (13mm) Quick Disconnect case drain
Supply Line: 125 micron, pleated gauze
Return Line: 20 micron

Heidra 200 — shown with John Deere 6068T, Skid Base
Pump Weight: 780 lbs. (354 kg.)

Complete pumpset is supplied with one each of 1-1/4" X 50' (32mm x 15.25M) high pressure feed and return hoses and one 1/2" X 50' (13mm x 15.25M) low pressure case drain hose.

Heidra 200

Notes:

  1. Impeller diameter: 11-3/8" (290 mm)
  2. Performance curves based on diesel engine speed
  3. Requires hydraulic system pressure to 4000 psi (276 BAR)

Performance data based on water testing at sea level and 68° F. Larger diameter pipes may be required for maximum flows.

Heidra 200

Product Datasheets

Twitter RSS YouTube
World Headquarters: 84 Floodgate Road | Bridgeport, NJ 08014
Phone: 856.467.3636 | .(JavaScript must be enabled to view this email address) | Terms & Conditions | Privacy Policy
xylem - Let's Solve Water