HL130M
The Godwin Dri-Prime 6" x 4" (150mm x 100mm) HL130M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL130M offers flowrates up to 1,300 gpm (82 l/sec.), total dynamic heads up to 650 feet (198M), and solids handling up to 1-3/8" (35mm) in diameter. Like all Godwin pumps, the HL130M includes the Dri-Prime air ejector priming system for fully automatic priming up to 28 feet (8.5M) of static suction lift.
- Fully automatic priming from dry to 28 feet (8.5M) of suction lift. Maximum heads to 650 feet (198M). Maximum flows to 1,300 gpm (82 l/sec.).
- Handles liquids with solids up to 1-3/8" (35mm) in diameter.
- Continuously operated venturi air ejector priming system operated by an air compressor requiring no form of periodic adjustment or operator intervention.
- Double, high pressure mechanical seal with high abrasion resistant silicon carbide interfaces. Oil bath immersion for dry running.
- Mounted to a structural steel skid with integral 200 gal. (757 liter) fuel tank and lifting bail.
- Standard engine — Caterpillar C-9 diesel. Other engines available. Electric drive version also available.
Performance Table
Diesel Set — Caterpillar C-9, 300 hp (205 kw) @ 2200 rpm
Impeller Diameter — 20-1/4" (514 mm)
| Total Delivery Head - Feet |
| Total Suction |
361 | 394 | 459 | 525 | 558 |
| Head - Feet | Output - GPM | ||||
| 10 | 1404 |
1334 |
1201 |
999 |
792 |
| 15 | 1390 |
1320 |
1188 |
973 |
761 |
| 20 | 1382 |
1307 |
1171 |
942 |
673 |
| 25 | 1373 |
1298 |
1157 |
911 |
616 |
Performance data listed in table and curves are based on water tests at sea level and 68° F (20° C).
Maximum flows may require larger diameter pipes.
Specifications
Maximum Operating Speed:
2100 rpm
Maximum Operating Temperature:
194° F (90° C)
Maximum Working Pressure:
285 psi (19.6 BAR)
Maximum Suction Pressure:
90 psi (6.2 BAR)
Maximum Casing Pressure:
425 psi (29.3 BAR)
Fuel Tank Capacity:
200 gal. (757 liters)
Pipe Connections:
Suction: 6" (150mm) ASA 150
Discharge: 4" (100mm) ASA 300
Solids Handling:
1-3/8" (35mm) dia.
Pump Casing and Bearing Casing:
Close grained cast iron
Impeller:
Cast chromium steel
Wearplates:
Cast chromium iron
Mechanical Seal:
Solid silicon carbide faced, oil bath lubricated
HL130M — Caterpillar C-9, Skid Base
Weight: 11,500 lbs. (5,227 kg.)
Product Datasheets
