HL160M
The Godwin Dri-Prime 8" x 6" (200mm x 150mm) HL160M is a heavy duty, fully automatic self-priming pump specifically offered for pumping under discharge pressure conditions or high discharge lift applications. The HL160M offers flowrates up to 2,000 gpm (126 l/sec.), total dynamic heads up to 600 feet (183M), and solids handling up to 1-3/8" (35mm) in diameter. Like all Godwin pumps, the HL160M includes the Dri-Prime air ejector priming system for fully automatic priming up to 28 feet (8.5M) of static suction lift.
- Fully automatic priming from dry to 28 feet (8.5M) of suction lift. Maximum heads to 600 feet (183M). Maximum flows to 2,000 gpm (126 l/sec.).
- Handles liquids with solids up to 1-3/8" (35mm) in diameter.
- Continuously operated venturi air ejector priming system operated by an air compressor requiring no form of periodic adjustment or operator intervention.
- Double, high pressure mechanical seal with high abrasion resistant silicon carbide interfaces. Oil bath immersion for dry running.
- Mounted to a structural steel skid with integral 250 gal. (946 liter) fuel tank and lifting bail.
- Standard engine — Caterpillar 3406C diesel. Other engines available. Electric drive version also available.
Performance Table
Diesel Set — Caterpillar 3406C, 440 hp (328 kw) @ 2000 rpm
Impeller Diameter — 20" (508 mm)
| Total Delivery Head - Feet |
| Total Suction |
450 | 500 | 550 | 575 | |
| Head - Feet | Output - GPM | ||||
| 15 | 1740 |
1500 |
1160 |
840 |
| 20 | 1620 |
1400 |
1100 |
820 |
| 25 | 1450 |
1250 |
1020 |
800 |
Performance data listed in table and curves are based on water tests at sea level and 68° F (20° C).
Maximum flows may require larger diameter pipes.
Specifications
Maximum Operating Speed:
2000 rpm
Maximum Operating Temperature:
194° F (90° C)
Maximum Working Pressure:
285 psi (19.6 BAR)
Maximum Suction Pressure:
90 psi (6.2 BAR)
Maximum Casing Pressure:
425 psi (29.3 BAR)
Fuel Tank Capacity:
250 gal. (946 liters)
Pipe Connections:
Suction: 8" (200mm) ASA 150
Discharge: 6" (150mm) ASA 300
Solids Handling:
1-3/8" (35mm) dia.
Pump Casing and Bearing Casing:
Close grained cast iron
Impeller:
Cast chromium steel
Shaft:
Nickel chrome steel
Wearplates:
Cast chromium iron
Mechanical Seal:
Solid silicon carbide faced, oil bath lubricated
HL160M — Caterpillar 3406C, Skid Base
Weight: 13,500 lbs. (6,109 kg.)
Product Datasheets
