HL260M
The Godwin Dri-Prime 10-inch x 10-inch (250mm x 250mm) HL260M automatic priming centrifugal pump is perfect for your biggest jobs. With solids-handling to 2" (50mm) in diameter, maximum flows of 4,760 GPM (1,081 m3/h) and 500' (150 m) of total dynamic head, and indefinite dry-running capabilities, the HL260M can be found in a wide variety of applications requiring high volume and high head.
- Fully automatic priming from dry to 28' (8.5 m) of suction lift.
- Direct drive automatic priming high volume centrifugal pumps with Godwin’s original double venturi Dri-Prime priming system. Also available in electric drive.
- Extensive application flexibility — will handle raw sewage, slurries and liquids with solids up to 2" (50 mm) in diameter.
- Dry running, high pressure oil bath mechanical seal with abrasion-resistant solid silicon carbide faces.
- All cast steel construction with cast steel impeller.
- Standard Caterpillar C-18 engine.
Performance Table
Caterpillar C-18 — 600 HP @ 1800 rpm
Impeller Diameter — 22"
| Total Delivery Head (feet) |
| Total Suction |
361 | 394 | 427 | 443 | 459 |
| Head (feet) | Output (USGPM) | ||||
| 9.8 | 4733 |
4073 |
3302 |
2642 |
1321 |
| 15.1 | 4733 |
4073 |
3302 |
2642 |
1321 |
| 20.0 | 3742 |
3522 |
3082 |
2201 |
1761 |
| 24.9 | 2201 |
1761 |
1321 |
881 |
- |
Performance data listed in table and curves based on water tests at sea level and 68°F (20°C).
Maximum flows may require larger diameter pipes.
Specifications
| Pipe Connections | 10"x10" (250 mm x 250 mm) ASA150# |
| Max. Capacity | 4,760 GPM (1,081 m3/h) |
| Max. Head | 500' (150 m) |
| Solids Handling | 2" (50 mm) |
| Impeller Diameter | 22" (540 mm) |
| Max. Op. Temp. | +176°F (80°C) |
| Max. Working Pressure | 232 psi (16 BAR) |
| Max. Suction Pressure | 87 psi (6 BAR) |
| Max. Test Pressure | 348 psi (24 BAR) |
| Max. Op. Speed | 1800 RPM |
| Fuel Tank Capacity | 375 gal (1416 l) |
Pump Casing & Suction Cover: Cast steel
Impeller: Cast steel
Non-Return Valve Flap: High nitrile rubber
Non-Return Valve Body: Cast iron
Mechanical Seal: Solid silicon carbide
Pump Shaft: Nickel chrome steel
Wearplates: Nickel chrome cast iron
Product Datasheets
